electrical issues

  1. N

    2004 Dashboard "information cluster" stops working

    Hi y'all, my dashboard "information center" went out a while back. It was out for around a week or so but came back on for a week maybe, then out again. It came back on again a month later but went out again for a month now. Everything goes out; all gauges, and the odometer/trip miles display...
  2. C

    No sound coming from speakers until I turn off the engine

    okay here goes. I just recently baught a 2000 jimmy sle 4x4. I wanted to replace the head unit so I went ahead and removed the old and was getting to ready to install the new. to my utter suprise wich sounded like "you Gotta be F****i*g kidding me!" I noticed that either the low life car dealer...
  3. JDubb1975

    2009 GMC Yukon Denali XL - Electrical Problems

    First off, I realize that this has been a very big issue for A LOT of owners having scoured the entire internet for causes and solutions with answers all over the place. I figured I would try and start up a dialogue with some well-informed folks and see if I can get a more reliable diagnosis...
  4. V

    Help electrical nightmare 2008 sierra

    Help me please! My 2008 sierra with 60k miles exhibits random intermittent electrical problems that started around 30k miles… and are possibly going to get me killed. I am a newbie to this forum and will try to be as thorough as possible…. First incident driving across the barren nevada desert...
  5. X

    Envoy electrical/starting issue

    2003 Envoy. Problem started a few weeks ago and got worse. Turn the key and the RPM and speedometer go crazy and 2 lights stay on which looks like a seat belt light and an Air bag light? (guy in a seat and what looks like a bag in his face) and the lights flicker on the dash a bit....Anyways...
  6. B

    Could the upper part of my gauge cluster be bad?

    I just purchased a 2002 gmc sonoma v6 and the the RPM, MPH, Fuel and Temperature Gauges do not work at all. The Battery and oil preasure gauges do work. I even tried switching the Stepper Motors around in an attempt to better help determine whats going on and to my surprise the stepper motor...
Back
Top