1999 Jimmy Will Not Shift Into Gear

gvsu141

New member
Joined
Feb 10, 2014
Messages
1
Reaction score
0
Points
0
Hi, I'm trying to help my brother out with his 1999 Jimmy with the 4.3L, as he is stuck without a car. The problem is that it will not shift into gear - Drive or Reverse. Any idea on what is causing it? More details:

It was running fine, and stalled when he pulled into the driveway. The next morning he goes out and it wouldn't budge. I found it to be charging fine at 14v running, but it had a bad battery. I was thinking that this could have been the case, since a bad alternator/battery can cause shifting problems.

With a new battery it starts/runs fine but will still not move. The shift linkage is working, and will go into neutral fine. It has electronic 4wd. 4wd won't engage either, the button just blinks and goes off.

Note: it has been very cold, with -40 windchill some days.

Any help would be great!
 
Hi, I'm trying to help my brother out with his 1999 Jimmy with the 4.3L, as he is stuck without a car. The problem is that it will not shift into gear - Drive or Reverse. Any idea on what is causing it? More details:

It was running fine, and stalled when he pulled into the driveway. The next morning he goes out and it wouldn't budge. I found it to be charging fine at 14v running, but it had a bad battery. I was thinking that this could have been the case, since a bad alternator/battery can cause shifting problems.

With a new battery it starts/runs fine but will still not move. The shift linkage is working, and will go into neutral fine. It has electronic 4wd. 4wd won't engage either, the button just blinks and goes off.

Note: it has been very cold, with -40 windchill some days.

Any help would be great!

Check the fuse to your 4wd system. IT could be that the transfer case in neutral. Try putting the transmission in neutral and then shifting the 4wd in to 2wd mode.

Start with the simple and then we can move on to determine if its the transmission that has failed. Check for pump failure and this is how its done. Check the transmission fluid level with the engine off, then start the engine and recheck fluid level. If level does not go down when engine is running, the pump is broken.

Good luck and keep us posted;)

Molson02536
 


Back
Top