i have changed my oil and all my fluids are full. is there a way to reset this light?
Tye1973 New member Joined Nov 26, 2008 Messages 2 Reaction score 0 Points 0 Nov 26, 2008 #1 i have changed my oil and all my fluids are full. is there a way to reset this light?
B Boattail New member Joined Oct 30, 2020 Messages 2 Reaction score 0 Points 1 Oct 30, 2020 #2 I know this is an old thread but I just joined the forum today. Thought this might help someone else. For 2003 and up. Turn the ignition to run (on position before starting engine). Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. Oil light will flash then go out. Turn the ignition off and then start the engine to verify the indicator has been reset.
I know this is an old thread but I just joined the forum today. Thought this might help someone else. For 2003 and up. Turn the ignition to run (on position before starting engine). Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. Oil light will flash then go out. Turn the ignition off and then start the engine to verify the indicator has been reset.