K Kenneth Henslee New member Joined Jul 15, 2020 Messages 1 Reaction score 0 Points 1 Jul 15, 2020 #1 After replacing my compressor,dryer,& orifface and fully charging the system, the clutch will not engage. All fuses and relays are good.
After replacing my compressor,dryer,& orifface and fully charging the system, the clutch will not engage. All fuses and relays are good.
P Phatocaster New member Joined Aug 3, 2020 Messages 15 Reaction score 1 Points 3 Aug 5, 2020 #2 Check the pressure switch. There is probably a high and low. The high one cycles the clutch and is usually on the line.
Check the pressure switch. There is probably a high and low. The high one cycles the clutch and is usually on the line.