Bleed clutch

Nnear1

New member
Joined
May 18, 2012
Messages
1
Reaction score
0
Points
0
Location
Rochester, New York
I was wondering if anyone could tell me how to bleed the clutch fluid on a 2001 gmc Sonoma v6 4.3 manual 5 speed. Thanks.
 
Similar to doing brakes-

Put vehicle on jackstands
Remove dust cap on left side of clutch housing
push a length of clear tubing over the valve
place other end in clear container with about 2 inches of fluid in it.
have someone depress pedal & hold it.
Open valve until asst. signals pedal is at the bottom of it's travel.
Repeat until stream is solid with no air bubbles in it or container.
Note- keep an eye on reservoir .
 


Back
Top