Ok so I have a 2012 sierra slt and took my friends step son out driving (16 yeah no kidding huge mistake) anyhow he got nervous n backed into post no real damage in back just back right side bumper pushed bout a 1/2 inch maybe ..my question is how do I pull it back or fix it with out destroying in not to mention pissing of the sensors ...am kinda at a loss here.nothing else got damaged....what does one do to fix this...
Bumper
- Thread starter Ackbobby
- Start date
98trck
Member
a come-along and a tree
c-clamps to clamp on the bumper then hook come-along
that is the only way you can control the amount of pull
c-clamps to clamp on the bumper then hook come-along
that is the only way you can control the amount of pull
mikeg57
New member
I backed into a dumpster last week,and pushed the right side of my bumper in about 1 inch..The bumper was pushed in,but not bent..The bumper brackets are slotted..Just loosen the bolts on that side,and you should be able to bang the bumper assembly back in place with a rubber hammer..
You could use a small bottle jack and a couple blocks of wood if its stuck.
You could use a small bottle jack and a couple blocks of wood if its stuck.
I was rear ended at a stoplight a few years ago and I thought that I had to replace the bumper so ordered one got it and when I loosed the bolts to start removing the bumper just sprung back to original place and was not damaged at all. Took the new bumper back and go a refund.