cntinuum
New member
Hi,
I have a 1992 GMC C2500 5.7L auto truck. My trip meter is not working correctly. My temp gauge never gets much above 100 degrees. I replaced the thermostat and sending unit, still the gauge reads low.
I was wondering if I could replace the instrument cluster with one with a tach. Since the interface is just a set of contacts on the circuit board, this would be a nice and easy upgrade.
Is 92-94 the correct years for direct replacement for truck and Suburban as donors?
16140015 on face
16140288 on circuit board
C050892 on circuit board
QPA 16140015 on label where steering column area at bottom side of cluster.
http://s1108.photobucket.com/albums/h413/cntinuum/1992 GMC Sierra C2500/
Attempted to load photos and don't see them. This should be a link to my Photobucket account.
Thanks,
Dave
I have a 1992 GMC C2500 5.7L auto truck. My trip meter is not working correctly. My temp gauge never gets much above 100 degrees. I replaced the thermostat and sending unit, still the gauge reads low.
I was wondering if I could replace the instrument cluster with one with a tach. Since the interface is just a set of contacts on the circuit board, this would be a nice and easy upgrade.
Is 92-94 the correct years for direct replacement for truck and Suburban as donors?
16140015 on face
16140288 on circuit board
C050892 on circuit board
QPA 16140015 on label where steering column area at bottom side of cluster.
http://s1108.photobucket.com/albums/h413/cntinuum/1992 GMC Sierra C2500/
Attempted to load photos and don't see them. This should be a link to my Photobucket account.
Thanks,
Dave