00skeletor00
New member
OK, so I was un-screwing the fuel lines from the throttle body to remove and change my Fuel Pressure sensor, then one of them snapped! right at the end where the threads/bolt are. So my question is, do I have to replace the whole fuel line from the gas filter OR can I some how un-attach the metal part from the hose part? there is the fuel filter, about 2 feet of metal fuel line, then about 2 feet rubber hose, then another 2 feet of fuel line that runs up into the head of the motor<- that's what is busted The truck is a 95 z71 4x4 with a 350 TBI