remove/replace instructions 2016 GMC Canyon front bumper

[jthies13]

Does anyone know of online install instructions for removing/replacing the front bumper on a 2016 GMC Canyon. I bought the black plastic number (GM part#22925741) and chrome bumper cover (GM#23405889)...but they came with no instructions. I know I can probably buy instructions, just thought if anyone knows of free instructions, that would be great.
Still think that you should get instructions with such expensive OEM parts.

 

[jeraldlklee]

Removal Procedure
Front Wheelhouse Liner Replacement » Remove
Disconnect the fog lamp connectors.


Front Upper Grille Bolt  (1) » Remove [6x]


Front Grille Lower Bolt  (1) » Remove [2x]


Front Bumper Lower Fascia Bolt  (1) » Remove [2x]
Front Bumper Fascia Bolt  (2) » Remove [2x]


Front Bumper Fascia to Fender Bolts (1) » Remove [3x]


Grille Retainer (1) » Remove


Carefully push a small nylon wedge between the fascia (1) and the fascia guide. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia.
Disconnect all electrical connectors.
Installation Procedure


Transfer components as necessary.
Front Bumper Fascia  (1) » Install
Connect the electrical connectors.


Grille Retainer (1) » Install


Caution: Refer to Fastener Caution .

Front Bumper Fascia to Fender Bolts (1) » Install and tighten 2.5 N•m( 22 lb ft) [3x]


Front Bumper Lower Fascia Bolt  (1) » Install and tighten 2.5N•m(22 lb ft) [2x]
Front Bumper Fascia Bolt  (2) » Install and tighten 2.5N•m(22 lb ft) [2x]


Front Grille Lower Bolt  (1) » Install and tighten 6 N•m (53 lb in) [2x]


Front Upper Grille Bolt  (1) » Install and tighten 2.5 N•m (22 lb in) [6x]
Connect the fog lamp connectors.
Confirm fog lamp operation.

 

[Doublebass]

I know this thread is months old, but i just bought a 2017 Canyon All-Terrain...

Not a lot of action on this forum! The Colorado guys are kicking our arse!

Anyway, I wanted to remove the air dam from the front, but all the fasteners are accessed from behind the grill. Appreciate the instructions above... I'm amazed at how much goes into just pulling the front =tricky!