Will C6 Corvette rims fit a 1998 GMC Sonoma?

[Tyler]

They are 17X10 on the front and 18X10 on the back. I think these rims are real sharp looking and I can get them for $400 for the whole set with almost brand new tires on them also.

Is the lug pattern the same? I heard on earlier model vette wheels that they would work just not sure about a C6 wheel.

Do I need spacers?

 

[blazin joe]

looks as though the bolt pattern is the same

bolt pattern is 5x120.65 for the c6 wheels they have a high off set so spacers may be required any ways all depends on what look you like. 400 bucks snag them.

 

[Molson02536]

They are 17X10 on the front and 18X10 on the back. I think these rims are real sharp looking and I can get them for $400 for the whole set with almost brand new tires on them also.

Is the lug pattern the same? I heard on earlier model vette wheels that they would work just not sure about a C6 wheel.

Do I need spacers?

Half a good news, they would fit perfectly. The Sonoma and C6 Vett rims have a 5x120.7 bolt pattern, both have 70.3 center bore, and both are high offset and will not need a spacer.

If you have a 2WD, in which case spacers will be needed. You may have to run a 2.5" front to clear the tie rod ends 3" rear spacers to clear the leaf spring, or you can go 2.5 all the way around and the rear will tuck in more for a larger size tire on the rim.

The only thing is you would have to make sure they don't rub when on the truck when turning the front wheel left to right all the way. Good luck and hope this helps.

 

[hackettsautomotive]

I know that the mid-80's Corvette rims fit real nicely on my Sonoma, without spacers or rubs.. All I had to do is just wrap them in low profile rubber..