-
🔍 Like our community? You can tell Google to show you results from this site more often. Just Click Here and then click the empty checkbox on the right side of our name.
The GMC Owners Group
What's on your mind?
I HAVE A 1995 GMC JIMMY with a 4.3 vortech engine i lost use of my blinkers i checked the fuses and all fuses are fine where else should i look to diagnose the issue
1 Replies
·
4699 views
M
Inspect or replace your turn signal relay, It's located behind your ashtray on the drivers side, Number 20 and 21 on this link. http://www.compnine.com/index.php?u...delid=6872&capuid=1&majorgroup=02&grouptype=B
The flasher relay is behind the panel to the left of the cigarrette lighter. You need a Torx 25 screwdriver and another screwdriver for those hex shaped screws, forgot the size. First unscrew the 2 Torx 25 screws beneath the steering wheel. Then unscrew the rest of those Hex screws on the bottom.
The panels overlap, so be prepared for a lot of unscrewing. You do need to unscrew the middle black panel on the bottom, right beneath the cig lighter. It's held by two Hex shaped screws, one on each side and are hard to unscrew. Also you need to remove your spare change sliding tray to unscrew the last hex looking screw.
Once you pop your panel off, the turn signal flasher is the right one. The Hazard flasher is the left one. You can find a replacement part at Autozone, and DON'T get the $184 Flasher switch, all you need is the signal flasher.
Inspect or replace your turn signal relay, It's located behind your ashtray on the drivers side, Number 20 and 21 on this link. http://www.compnine.com/index.php?u...delid=6872&capuid=1&majorgroup=02&grouptype=B
The flasher relay is behind the panel to the left of the cigarrette lighter. You need a Torx 25 screwdriver and another screwdriver for those hex shaped screws, forgot the size. First unscrew the 2 Torx 25 screws beneath the steering wheel. Then unscrew the rest of those Hex screws on the bottom.
The panels overlap, so be prepared for a lot of unscrewing. You do need to unscrew the middle black panel on the bottom, right beneath the cig lighter. It's held by two Hex shaped screws, one on each side and are hard to unscrew. Also you need to remove your spare change sliding tray to unscrew the last hex looking screw.
Once you pop your panel off, the turn signal flasher is the right one. The Hazard flasher is the left one. You can find a replacement part at Autozone, and DON'T get the $184 Flasher switch, all you need is the signal flasher.
Hello. 5 years old without any problems. Now the radio changes channel when ever it wants to. Getting very annoying. Any ideas what to do with it ?
1 Replies
·
467 views
I have a 2015 Canyon. Has anyone installed a trailer brake control. I have a connection cable and need to know where it plugs in under the dash
0 Replies
·
7 views
Looking to upgrade the suspension on my 05 gmc savana 3500 extended. Any suggestions
0 Replies
·
5 views
Alec
Hello, hive! I have a 1999 GMC K1500 Suburban. When I step on the brake pedal, no keys in switch, the dash and marker lights come on. When headlights are off, driving normally, both turn signals work normally, but the dash and marker lights flash with right turn signal. When headlights are on, left signaL works normally, but right signal buzzes a little at the relay, but does not blink, even though the rear lamp does light on the right side. I am at a loss. So is my mechanic. Help??
0 Replies
·
10 views
Adaptive ride control has stopped working. Is there a simple fix?
1 Replies
·
18 views
I have a 1991 2500 Vandura conversion van(Glaval) and I'm trying to find the Engine Control Module(ECM). Anyone have any ideas?
2 Replies
·
4161 views
Mark Staffanou
I'm replacing a lower seat foam and leather. The lower foam is attached to a smaller metal frame and is then bolted to the main seat frame. At the rear of the foam/smaller frame there are 2 locating pins that must fit into holes at the rear of the lower seat before the 2 front screws line up with the holes to put screws in. I' not sure what to call them but I need at least 1, 2 would be better, help please.
0 Replies
·
38 views
Luisf
a 2022 GMC Sierra 3.0 diesel, press the start/shut off button, and the motor stays on
0 Replies
·
31 views
"I've come across quite a few articles about lifter damage lately. I assume much of it is marketing hype, but I suspect there’s some truth to it in certain cases. Any thoughts or real-world experiences?"
0 Replies
·
97 views