• 🔍 Like our community? You can tell Google to show you results from this site more often. Just Click Here and then click the empty checkbox on the right side of our name.

The GMC Owners Group

As an Amazon Associate we earn from qualifying purchases.
What's on your mind?
Administrator
Staff member Lead Administrator
· posted in The GMC Owners Lounge
Filed under: Car Buying, SUVs, Trucks/Pickups, Marketing/Advertising, Chevrolet, GMC
silverado2.jpg


GM has bucked the domestic trend of consistently giving up market share to Japanese automakers for the past couple months, and with a new round of incentives, the General is hoping to keep the trend going. The Silverado and GMC Envoy are among the vehicles receiving an additional $1,000 in rebates during the entire month of October. GM is using targeted incentives on trucks and SUVs, but the incentives don't apply universally throughout the lineup.

Although GM's sales improved year over year in September, incentives were actually down $240 vs. August, to an average of $3,089 per vehicle. That's still $800 more than the industry average, but better than GM's incentive spending in years past. With GM's market share stabilizing, incentives closer to industry average, a competitive labor contract, and some interesting products in the pipeline, GM may have turned the barge faster than we expected.

[Source: Bloomberg]GM follows last month's gains with new incentives on trucks and SUVs originally appeared on Autoblog on Thu, 04 Oct 2007 11:26:00 EST. Please see our terms for use of feeds.


Read | Permalink | Email this | Comments

More...
0 Replies · 1417 views
B
Last reply · posted in GMC Canyon Forum
Hello. 5 years old without any problems. Now the radio changes channel when ever it wants to. Getting very annoying. Any ideas what to do with it ?
1 Replies · 468 views
TERRY GARBIG
I GOT THE SAME PROBLEM.HAD THE RADIO REPLACED UNDER WARRENTY BUT NOW ITS DOING IT AGAIN( OUT OF WARRENTY
C
· posted in GMC Canyon Forum
I have a 2015 Canyon. Has anyone installed a trailer brake control. I have a connection cable and need to know where it plugs in under the dash
0 Replies · 8 views
F
· posted in GMC Savana Forum
Looking to upgrade the suspension on my 05 gmc savana 3500 extended. Any suggestions
0 Replies · 7 views
Alec
· posted in GMC Suburban Forum
Hello, hive! I have a 1999 GMC K1500 Suburban. When I step on the brake pedal, no keys in switch, the dash and marker lights come on. When headlights are off, driving normally, both turn signals work normally, but the dash and marker lights flash with right turn signal. When headlights are on, left signaL works normally, but right signal buzzes a little at the relay, but does not blink, even though the rear lamp does light on the right side. I am at a loss. So is my mechanic. Help??
0 Replies · 11 views
H
Last reply · posted in GMC Acadia Forum
Adaptive ride control has stopped working. Is there a simple fix?
1 Replies · 20 views
H
My 2021 denali with adaptive ride control does not seem to be "adapting". What is the fix?
S
Last reply · posted in GMC Vandura Forum
I have a 1991 2500 Vandura conversion van(Glaval) and I'm trying to find the Engine Control Module(ECM). Anyone have any ideas?
2 Replies · 4163 views
J
Check under the drivers seat
H
I have a 1991 2500 Vandura conversion van(Glaval) and I'm trying to find the Engine Control Module(ECM). Anyone have any ideas?
06/18/2026
How did all that work out?
I'm wondering about your preferred PSI for tires.
My mechanic recommended 32 psi for my heavily-loaded 1990 Vandura.
That's what I've used for years (once it was around 36-38, and that felt like I was on rollerblades and could not sense the road . . . ), yet I see videos saying that 32 is way too low and damages tires . . .

(I got 11-12 years out of my tires at 32 psi.)

Thank you for any helpful feedback!
Mark Staffanou
· posted in GMC Sierra Forum
I'm replacing a lower seat foam and leather. The lower foam is attached to a smaller metal frame and is then bolted to the main seat frame. At the rear of the foam/smaller frame there are 2 locating pins that must fit into holes at the rear of the lower seat before the 2 front screws line up with the holes to put screws in. I' not sure what to call them but I need at least 1, 2 would be better, help please.
0 Replies · 39 views
Luisf
· posted in GMC Sierra Forum
a 2022 GMC Sierra 3.0 diesel, press the start/shut off button, and the motor stays on
0 Replies · 32 views
M
· posted in GMC Sierra Forum
"I've come across quite a few articles about lifter damage lately. I assume much of it is marketing hype, but I suspect there’s some truth to it in certain cases. Any thoughts or real-world experiences?"
0 Replies · 98 views
D
· posted in GMC Sierra Forum
Are the rear bumpers the same between a fleet side & style side?
0 Replies · 42 views
Back
Top