frustratedyukonowner
New member
- Joined
- Dec 30, 2012
- Messages
- 1
- Reaction score
- 0
- Points
- 0
I could tell my alternator was going bad. Dash lights started to flicker, lost guages, car didn't turn back on. I replaced the alternator with a used one as I don't want to spend 200.00 on a new one, and it seemed fine, reading 14 amps... But then, next time I turned it on, it read 11.5/12 amps. Slowly while driving 10 or 15 miles it reduced to 9 or lower and I lost guages and once I turned it off, it wouldn't start again. I replaced the alternator again... withe a new/used one. It starts, reads 11.5/12 amps and slowly reduces down to 9 while driving, lose guages, and once I turn engine off, it won't start again... What's my next step? I can't find the alternator fuse, if such thing exists. Found the fuses for just about everything else though. Please help this novice frustrated yukon owner out.
Thanks
DGG
Thanks
DGG