• 🔍 Like our community? You can tell Google to show you results from this site more often. Just Click Here and then click the empty checkbox on the right side of our name.

can you bypass the primary o2 senson on a 2000 GMC Jimmy?

As an Amazon Associate we earn from qualifying purchases.

Mike

New member
Joined
Apr 12, 2009
Messages
20
Reaction score
0
Points
0
If so, how and what products do you recommend? I've seen simulator sensors but they all seem to be for the sensor AFTER the cat. I need to bypass the sensor BEFORE the cat...
 
If so, how and what products do you recommend? I've seen simulator sensors but they all seem to be for the sensor AFTER the cat. I need to bypass the sensor BEFORE the cat...

NO you can not bypass the O2 sensors before the Catalytic Converter. The right and left bank O2 sensors are needed to make the right adjustments to your air fuel ratio. The the O2 sensors bypassed or if it's not functioning properly. The ECM will run on a open loop and will set the engine to run on a reset program, this preset program is also know as limp home program and the performance and fuel economy will not be not at it's best.

With a bad OS sensor or disconnected, you can still drive your Jimmy. But as mentioned you performance will be compromised and you may experience excessive carbon build up in your engine.

Good luck and hope this helps.;)
 


Back
Top