• 🔍 Like our community? You can tell Google to show you results from this site more often. Just Click Here and then click the empty checkbox on the right side of our name.

I Have A 2001 Gmc Yukon And It Continues To Stall And Have Problem Staying Running?

As an Amazon Associate we earn from qualifying purchases.

Pamela

New member
Joined
Jan 14, 2010
Messages
2
Reaction score
0
Points
0
I Changed The Fuel Pump, Spark Plugs And Wires, The Fuel Filter,the Valve Gasket And A Oil Change. The Truck Will Start Put There Is A Popping Sound When I Give It Gas And Then It Will Die. But We Put A Towel With Gas On The Throttle Body And It Starts And Runs Just Fine. I Got The Light Tested And It Show Multiple Misfires Please Tell Me What Direction To Look? The Truck Will Not Go Far And Is Idled Low
 
Have you thought of replacing the coil packs? If you know which cylinders are misfiring and if they are consistently misfiring it may be time. I replaced one of mine on my '02 Yukon after appx 100,000 miles.
 
I Changed The Fuel Pump, Spark Plugs And Wires, The Fuel Filter,the Valve Gasket And A Oil Change. The Truck Will Start Put There Is A Popping Sound When I Give It Gas And Then It Will Die. But We Put A Towel With Gas On The Throttle Body And It Starts And Runs Just Fine. I Got The Light Tested And It Show Multiple Misfires Please Tell Me What Direction To Look? The Truck Will Not Go Far And Is Idled Low

Start with the simple and check your fuel pressure at the shredder valve. You mentioned that you replaced the fuel pump, the wire harness if not changed my be bad and or the ground wire on the frame may have a bad ground or not connected. A bad ground will cause a week fuel pressure.

As mentioned start with checking the fuel pressure and then check the fuel pressure regulator for any leaks or the vacuum line cracked and damaged.

Good luck and keep us posted:D
 


Back
Top