...won't start. Any suggestions? Ignition just clicks now, I tried setting it 180 out too. Nothing is working. Number 1 pistons at tdc, and number 3's firing, it's a quarter of a turn off.
The distributor will not fall into place set on number 1 and it's landing on number 3 and I'm at tdc on piston 1. There's a bar on the bottom of the distributor and you can either put it in one way or 180 the other way, otherwise it won't fall into place.
It's the original distributor and all of the wires are marked numerically.
The cap can go in one way or 180 out, tried both ways, and neither worked.
The distributor will not fall into place set on number 1 and it's landing on number 3 and I'm at tdc on piston 1. There's a bar on the bottom of the distributor and you can either put it in one way or 180 the other way, otherwise it won't fall into place.
It's the original distributor and all of the wires are marked numerically.
The cap can go in one way or 180 out, tried both ways, and neither worked.