Info needed for heater blend door actuator

[myownspeed]

I am trying to install a new heater blend door actuator in my 1997 Jimmy. The actuator that I removed has 6 pins for the electrical connection, but I only have 4 wires attached to the wiring plug. My new actuator only has 4 pins, BUT, they do not match up with my wiring harness. From what I can gather, the 6 pin actuator is for automatic climate control, and the 4 pin is for standard control.
I am trying to locate some electrical diagram or information on the actuator so that I can rearrange the wiring in my connector to fit the new module. Can anyone point me toward a resource for this info? Thanks in advance.

 

[Smoky02]

You can get all the electrical schmatics that you will require by joining Mitchell at http://www.eautorepair.net/Marketing/Default.asp.

And once you get them you can print them out, so you will have them for future repairs.

If you are looking to save some money they have a weekly fee schedule.

 

[myownspeed]

Thanks for the link Smoky02. I'll give it a shot, but I'm skeptical whether or not it will have the breakdown or info needed about the actuator itself.