Shooter54

Shooter54

New member
Joined
Feb 10, 2011
Messages
2
Reaction score
0
Points
0
94 Jimmy 4X4 in 4wd heard matelic snap but went on. Next time used heard another snap an front axle stoped pulling. But still deives fine an quiet. What Happened?????
 
94 Jimmy 4X4 in 4wd heard matelic snap but went on. Next time used heard another snap an front axle stoped pulling. But still deives fine an quiet. What Happened?????

Check to see if your front axle actuator cable snapped. The actuator is located under your battery and then the cable runs from there to the front axle.

It's common for older Jimmy's for the cable to snap where they connect since it's only held on by a clip what may be corroded and may have disconnected the cable.

Good luck and keep us posted. ;)
 
94 Jimmy Front Axle

The sylonoid and cable are in ok condition,so it would seem the shift fork might be the problem.
 


Back
Top