bobbyuwood
New member
- Joined
- Aug 9, 2009
- Messages
- 1
- Reaction score
- 0
- Points
- 0
Is it possible to switch the grille with the square headlights with the one with rectangular headlights.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
switching grille on 1993 GMC Sierra?
- Thread starter bobbyuwood
- Start date
boogie_4wheel
New member
- Joined
- Nov 27, 2008
- Messages
- 16
- Reaction score
- 0
- Points
- 0
Yes. You will need the inner and outer grille assembly. The lighting is different on the composite headlights, so you will need to modify your wiring as well.
Clip off the existing headlight bulb plug, and separate the high and low beam wires, and add a socket for a 9006 (low beam), and 9005 (high beam). You will also need an 1157 bulb socket to add the additional marker/signal bulb that is used on the other grilles.
The bulb sockets can be found at any automotive parts stores.
Clip off the existing headlight bulb plug, and separate the high and low beam wires, and add a socket for a 9006 (low beam), and 9005 (high beam). You will also need an 1157 bulb socket to add the additional marker/signal bulb that is used on the other grilles.
The bulb sockets can be found at any automotive parts stores.