unknown vaccum hose thats not connected

J

jrobb913

New member
Joined
May 22, 2011
Messages
43
Reaction score
0
Points
0
Location
Northern ontario, canada
hey guys, i have a vaccum hose dissconected under my hood and i dont know where it goes or what its for, its located next to the abs control module i think? ive attached soem pictures to show you also, the first pictures the hose, the secconds one of the places where it attaches, and the thirds just a farther out view of #2
 

Attachments

  • 2011-10-01 15.15.39.webp
    2011-10-01 15.15.39.webp
    89.2 KB · Views: 139
  • 2011-10-01 15.17.49.webp
    2011-10-01 15.17.49.webp
    53.2 KB · Views: 135
  • 2011-10-01 15.18.05.webp
    2011-10-01 15.18.05.webp
    72.8 KB · Views: 118
jrobb913 said:
hey guys, i have a vaccum hose dissconected under my hood and i dont know where it goes or what its for, its located next to the abs control module i think? ive attached soem pictures to show you also, the first pictures the hose, the secconds one of the places where it attaches, and the thirds just a farther out view of #2
Click to expand...

That vacuum line connects to your vacuum tank in your fender right at the corner buy your cruise control module. Here is a picture that should help you understand what i am saying. http://www.kylestubbins.com/files/images/blazer_vacuum.jpg

Good luck and keep us posted. ;)

Molson02536
 
i was looking into my fender right where the hose is i cannot find anything that it could connect to, even when i stuck my hand in there to feel around all i could find was the ends of bolts
 
jrobb913 said:
i was looking into my fender right where the hose is i cannot find anything that it could connect to, even when i stuck my hand in there to feel around all i could find was the ends of bolts
Click to expand...

OK what year is the Jimmy and ill get back to you. The photo i sent to you is pretty much the same as for all of the Jimmy's and Blazer. With a few changes to location to where the major components are on certain year changes.

Post back to what year your Jimmy is and ill get back to you as soon as i can get back on line.

Good luck and keep us the great work. :D

Molson02536
 
I broke the plastic fitting at that wheel well connection and I couldn't see or feel it either. I ended up unbolting a component (whatever it was) mounted on the wheel well. Right now I'm 140 mi. away from my jimmy, so I can't check it. But I do remember the hose connection being below and slightly between the component (that I had to remove) and the wheel well.
 
ok i finally found it, i had to unbolt the abs and the fuse box and take them out to finally find it, and i put a touch of krazy glue on it with a tie strap so hopefully itll never come off again, do you know what the hose is for exactly?
 
I asked the same question a few months ago. No answer, so I'm assuming it enters the cab. But right now all eyes are upon you. It's up to you to find out where it goes.
Glad you got it nailed down.
 
Molson, Thank you. I've got a full plate right now, but I'll be getting back on the vacuum line replacement shortly.
 
You must log in or register to reply here.

Share this page



Back
Top