playinwitmyjimmy
New member
AnybodyI know how to manually. roll up power windows on a 93?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
windows
- Thread starter playinwitmyjimmy
- Start date
playinwitmyjimmy
New member
Also need to know how to take off the dash part to expose the fan/ ac unit switches to cut the ac or heater on
abit vague but if your windows quit you will have to track down the problem - could be as simple as a ground, but in 'til then, take of door panel,then using a wire ~ even an extension corn with both ends cut off, find the window motor, and touch the wire to the motor contacts ( connect to battery) should run window up / down depending on polarity
as for your other question "...cut a/c, heater on/off ..." ????
the switch the changes vents from floor to vent to defrost is controlled a via vacuum system connected under the hood , replace those small vacuum hoses on the drivers side ..
as for your other question "...cut a/c, heater on/off ..." ????
the switch the changes vents from floor to vent to defrost is controlled a via vacuum system connected under the hood , replace those small vacuum hoses on the drivers side ..
Switch Doctor
New member
I do not have the schematics to bypass the switch. More and likely the switch is what is causing the issue. You can use a tester to see if you are getting power to the switch. http://www.switchdoctor.net Free Fast Shipping 30 day return policy. If the switch doesn't solve the issues it can be returned.